Influence Of Ultrasounds On Interfacial Microstructures Of Cu-Sn Solder Joints

PurposeThis study aims to investigate the interfacial microstructures of ultrasonic-assisted solder joints at different soldering times.Design/methodology/approachSolder joints with different microstructures are obtained by ultrasonic-assisted soldering. To analyze the effect of ultrasounds on Cu6Sn5 growth during the solid-liquid reaction stage, the interconnection heights of solder joints are increased from 30 to 50 mu m.FindingsScallop-like Cu6Sn5 nucleate and grow along the Cu6Sn5/Cu3Sn interface under the traditional soldering process. By comparison, some Cu6Sn5 are formed at Cu6Sn5/Cu3Sn interface and some Cu6Sn5 are randomly distributed in Sn when ultrasonic-assisted soldering process is used. The reason for the formation of non-interfacial Cu6Sn5 has to do with the shock waves and micro-jets produced by ultrasonic treatment, which leads to separation of some Cu6Sn5 from the interfacial Cu6Sn5 to form non-interfacial Cu6Sn5. The local high pressure generated by the ultrasounds promotes the heterogeneous nucleation and growth of Cu6Sn5. Also, some branch-like Cu3Sn formed at Cu6Sn5/Cu3Sn interface render the interfacial Cu3Sn in ultrasonic-assisted solder joints present a different morphology from the wave-like or planar-like Cu3Sn in conventional soldering joints. Meanwhile, some non-interfacial Cu3Sn are present in non-interfacial Cu6Sn5 due to reaction of Cu atoms in liquid Sn with non-interfacial Cu6Sn5 to form non-interfacial Cu3Sn. Overall, full Cu3Sn solder joints are obtained at ultrasonic times of 60 s.Originality/valueThe obtained microstructure evolutions of ultrasonic-assisted solder joints in this paper are different from those reported in previous studies. Based on these differences, the effects of ultrasounds on the formation of non-interfacial IMCs and growth of interfacial IMCs are systematically analyzed by comparing with the traditional soldering process.