Study On Influencing Factors Of Photocatalytic Performance Of Cds/Tio2 Nanocomposite Concrete

In this study, a high-energy ball mill was used to composite nano-TiO2 and CdS, and three kinds of nanocomposite photocatalysts TiO2, CdS/TiO2 -R400, and CdS/TiO2-R600 were prepared, which can respond to visible light. The photocatalytic concrete test block was prepared by mixing the nanocomposite photocatalyst and other masses with cement by incorporation method. To study the effect of the photocatalyst content on the photocatalytic performance of nanoconcrete, a total of four catalyst contents (0, 2%, 5%, and 8%) were set. The effects of high-temperature treatment (400 degrees C) and different light sources (ultraviolet and visible light) on photocatalytic efficiency were also considered. The results show that the catalytic efficiency of CdS/TiO2-R400 under two light sources is higher than that of the other two photocatalysts. Compared to ultraviolet light sources, the photocatalytic efficiency of CdS/TiO2 nanocomposite concrete under visible light is lower, and the efficiency is below 9%. The optimal amounts of CdS/TiO2 nanocomposite photocatalyst under ultraviolet and visible light are 2% and 5%, respectively. The high-temperature treatment can improve the photocatalytic performance of CdS/TiO2 nanocomposite photocatalyst by 2% to 3%.