Counterpart Test For Lstf 1% Cold-Leg Break Loca (Sb-Cl-32) Utilizing Atlas Test Facility

The counterpart test of the OECD-ATLAS project named A5.1 was performed using a thermal-hydraulic integral effect test facility, ATLAS. The target scenario for the A5.1 test was the LSTF SB-CL-32 test. The SB-CL-32 test is a 1% horizontal small break loss of coolant accident (SBLOCA) at the cold leg with cold leg injection of the emergency core cooling system (ECCS) and accident management (AM) action. The test objective is to investigate the thermal hydraulic phenomena during a cold leg SBLOCA such as core heat-up, loop seal clearing (LSC), and the effect of AM actions. To achieve the test objectives, scaling analysis between LSTF and ATLAS was conducted first. The detailed test conditions such as initial and boundary conditions and sequence of events were determined based on the scaling analysis result. The experimental result showed that overall thermal hydraulic behavior which can be expected in this kind of SBLOCA scenario was observed. However, significant differences were found in the A5.1 test result compared with the LSTF SB-CL-32 test result in the view point of the loop seal clearing phenomenon and the maximum heater rod surface temperature behavior. These differences result from the different design between two test facilities which are refer to the different prototype nuclear power plant. Thus, several test condition parameters were analyzed as the sensitivity study utilizing the thermal hydraulic system analysis code to check their effect on the system response. From the sensitivity analysis result, it was confirmed that the A5.1 test was well modeled as a counterpart test of LSTF and realized the thermal hydraulic behavior during SBLOCA transient. This test result can be utilized to evaluate the prediction capability of thermal hydraulic system analysis codes and to validate the scale-up capability of integrated effect test (IET) test data to the nuclear power plant condition.