Impacts of surface wettability and roughness of styrene-acrylic resin films on adhesion behavior of microalgae Chlorella sp

Biofilm attached cultivation is a promising method for efficient production of microalgae. Determining the surface property index to select an appropriate substrate benefiting the algae adhesion and biofilm formation is very important for the cultivation method. This work focused on elucidating and quantifying the influence of surface wettability and roughness of substrate on Chlorella vulgaris adhesion. Firstly, surface modified styreneacrylic (SA) resin films by adding different dosage of perfluoroalkyl ethyl acrylate (FM) were prepared. Property characterization shows that the surface contact angle in water, formamide and diiodomethane of FM modified SA films is significantly associated with the FM dosage, while the other surface properties including zeta potential, surface potential and surface roughness have insignificant difference. The calculated surface free energy parameters show that the SA films belong to the non-polar substrata. A well quantitative correlation that the adhesion capacity of C. vulgaris linearly declines with the increase of water contact angle was obtained. And a near linear relationship between the adhesion capacity and the surface free energy (gamma), or the cohesion free energy (Delta G(coh)) was also observed. Secondly, the surface roughness solely changed SA films were prepared by replicating the morphology of stainless steel sieves through the PDMS template method. The patterned SA films have alternately arranged rectangular "valleys" and "ridges". A well linear correlation between the microalgae adhesion capacity and the surface roughness was also obtained.