Formation mechanism and elimination method of joint defects in lattice structures printed by metal droplet deposition manufacturing

Benefiting from the dense inner microstructure and smooth bead-like surface morphology, metal droplet deposition manufacturing (MDDM) is advantageous in manufacturing small metallic lattice structures, which have great potential in advanced aerospace, energy, and robotics applications. However, the improper top-layer droplet distance leads to joint defects in the printed lattices and deteriorates the forming accuracy. Moreover, if the substrate temperature and inclined angle increase, joint defects may occur even if the top-layer droplets are at an ideal distance due to droplet oscillation. This work proposes a novel method to eliminate joint defects by re-placing the joint region droplets to an ideal center distance. To this end, the dynamics of top-layer droplets (impact, spread, recoil, and oscillation) were investigated by combining morphology analysis and high-speed photography (Ts = 673 K, θ = 45°). A theoretical model was established to obtain the parameter range of defect-free joints through a series of bifurcate lattice printing experiments. Then, the morphology and generation mechanism of cumulative joint defects in the lattices at higher temperatures and angles (Ts = 773 K, θ = 60°) were analyzed. A parameter window of joint morphology with different values of inclined angle, substrate temperature, and top-layer droplet distance was established for predicting potential defects in the printing trace. Next, a novel method was proposed to remove redundant droplets and re-place top-layer droplet coordinates into the ideal center distance. Furthermore, the printing strategy was expanded to multi-truss lattices using three-dimensional transformation matrixes. Finally, multiple cells bifurcate, triangular, and pyramid lattices were successfully printed with perfect joints. The height deviation of joint regions is <5 % of the droplet diameter, verifying the feasibility of the proposed strategy. This work represents a further step towards MDDM printing of high-quality truss lattice structures and other complex 3D architectures.