Effect Of Vancomycin Soaking On Anterior Cruciate Ligament Graft Biomechanics

Purpose: To evaluate the effect of soaking of anterior cruciate ligament (ACL) grafts in vancomycin solution on graft biomechanical properties at the time of implantation. Methods: The central third of patellar tendons was harvested from mature bovine knees and prepared as a tendon-only graft or a bone-tendon-bone (BTB) graft. Tendons were wrapped in gauze soaked in vancomycin solution (VS) (5 mg/mL) or normal saline (NS) and left to stand for 30 minutes at room temperature, simulating graft exposure times in the operating room during ACL reconstruction. Tensile testing was carried out on a materials testing system with (1) low-magnitude loading (60 N at 3 mm/s) with repeated testing of tendon-only grafts; and (2) high-magnitude loading (600 N at 10 mm/min) of BTB grafts. For tendon-only grafts, specimens were first wrapped in NS-soaked gauze and underwent testing, with repeated testing performed after wrapping in gauze soaked in VS or buffered VS (pH 7.0). For BTB grafts, specimens were randomly assigned to treatment with VS or NS. Results: For tendon-only grafts, there was no difference in Young's modulus (YM) after soaking with VS soaking (baseline, 12.69 MPa; treatment, 16.07 +/- 4.44 MPa; P = .99) or buffered VS (baseline, 12.45 +/- 4.55 MPa; treatment, 15.56 +/- 2.83 MPa; P = .99). For BTB grafts, there were no differences in elongation strain (VS, 46.8% +/- 7.0%; NS, 31.5% +/- 13.5%, P = .19) or YM (VS, 158.4 +/- 15.8 MPa; NS, 158.5 +/- 23.3 MPa, P = .99). Conclusions: According to controlled biomechanical tests, vancomycin soaking of patellar tendon grafts does not adversely affect time-zero material properties.