A novel bounded EIT protocol to generate inhomogeneous skull conductivity maps non-invasively.

Electrical Impedance Tomography (EIT) can be used to estimate the electrical properties of the head tissues in a parametric approach. This modality is called parametric EIT or bounded EIT (bEIT). Typical bEIT protocols alternate between several current injection patterns with two current injection electrodes each: one source and one sink ("1-to-1"), while the rest of the electrodes measure the resulting electric potential. Then, one value of conductivity per tissue (e.g. scalp and/or skull) is estimated independently for each current injection pair. With these protocols, it is difficult to obtain local estimates of the skull tissue. Thus, the grand average of the estimates obtained from each pair is assigned to each tissue modeling them as homogeneous. However, it is known that these tissues are inhomogeneous within the same subject. We propose the use of current injection patterns with one source and many sinks ("1to-N") located at the opposite side of the head to build individual and inhomogeneous skull conductivity maps. We validate the method with simulations and compare its performance with equivalent maps generated by using the classical "1-to-1" patterns. The map generated by the novel method shows better spatial correlation with the more conductive spongy bone presence.Clinical Relevance- The novel bEIT protocol allows to map individual head models with spatially resolved skull conductivities in vivo and non-invasively for use in electroencephalography (EEG) source localization, transcranial electrical stimulation (TES) dose calculations and TES pattern optimization, without the risk of ionizing radiation associated with computed tomography (CT) scans.