D-Band Transmitter/Receiver Chipset with End-Fire On-chip Antennas Using 0.13-μm SiGe BiCMOS Technology

This paper presents a D-band (110–170 GHz) transmitter/receiver (Tx/Rx) chipset with end-fire on-chip antennas (OCAs) using 0.13-μm SiGe BiCMOS technology. The input LO signal frequency of the chipset is 31.25 GHz. A 62.5-GHz frequency doubler, a D-band 2nd-harmonic up-conversion mixer, a power amplifier (PA), and an end-fire antenna are integrated in the Tx. An end-fire antenna, a D-band low-noise amplifier (LNA), a 2nd-harmonic down-conversion mixer, and a 62.5-GHz frequency doubler are integrated in the Rx. The end-fire OCA has gain and efficiency of 4.1 dBi and 83%, respectively. Maximum measured effective isotropic radiation power (EIRP) of 9.2 dBm and conversion gain of 21 dB are achieved for the Tx and Rx, respectively. The Tx/Rx are packaged on PCBs through wire bonding and chip-to-chip wireless communication using 16QAM modulation with the data rate of 4 Gb/s is demonstrated. The DC power consumption of the whole chip is ~1150 mW, and the total chip size is 2 × 3.5 mm 2 .