Titanium Aluminide Coating on Titanium Surface Using 3-Dimensional Micro Welder

Feasibility of a new method of titanium aluminide coating on titanium surface based on a reaction between aluminum liquid beads and the surface of titanium substrate has been studied using a computer aided 3-dimensional micro welder (3DMW) designed by the present authors. A predetermined length of thin aluminum wire was fed onto the substrate surface, and a spark was stricken from a thin electrode of a W-Ce2O3 alloy to make a small aluminum liquid bead on the substrate surface and to simultaneously melt a small area of the substrate surface beneath the bead. All conditions including the length of the wire feeding, the position of the electrode, electric power etc. had been programmed beforehand. The liquid bead containing aluminum and titanium rapidly solidified on the titanium substrate surface producing titanium aluminides on it. Repetition of the aluminum wire feeding, the electrode positioning and the spark striking produced a coating layer consisting of sub-layers of TiAl3, TiAl and Ti3Al from the surface side to the substrate side. Vickers hardness and wear resistance of the coated sample were remarkably improved.