All in one plasma process: From the preparation of S-C composite cathode to alleviation of polysulfide shuttle in Li-S batteries.

Tremendous efforts have been made to improve the electrochemical performance of the lithium-sulfur batteries. However, challenges remain in achieving fast electronic and ionic transport while accommodate the significant cathode volumetric change. On the other hand, the severe capacity decay mainly attributed to polysulfide shuttle also hampers the practical applications. Here, we report a simple, low-cost, and eco-friendly method for the one-step preparation of a binder-free S-C composite cathode by plasma dissociation of CS2 containing gases at room-temperature. The key issue of polysulfide shuttle effect in Li-S batteries is also effectively resolved just by the introduction of N2 into the precursor gases. The electrode exhibits a high reversible capacity of ~600 mAh/g of the total hybrid of S + C at 100 mA/g after 100 cycles with an excellent initial coulombic efficiency of nearly 100%. The cells also demonstrate along cycle life and an extremely high capacity of ~306 mAh/g even after 300 cycles at 1 A/g with a high coulombic efficiency of about 100%. The proposed method will open the way for the plasma applications in facile preparation of Li-S batteries and the improvement of its electrochemical performance.