Realizing Constant Current and Constant Voltage Outputs and Input Zero Phase Angle of Wireless Power Transfer Systems With Minimum Component Counts

In both normal and fast wireless electric vehicle charging systems, constant current/constant voltage (CC/CV) charging profile, regardless of the variation of the battery state of charge, is one of the most essential characteristics to ensure the battery performance and reliability. The input zero phase angle (ZPA) is able to minimize the system volt-ampere rating, enhance the power transfer capability, and make it easy to achieve soft-switching operation over the full range of battery charging profile. Therefore, the load-independent CC and CV output characteristics with ZPA conditions are necessary for wireless charging systems. However, the existing methods that can achieve these functions either add power switches or need a large number of compensation components, which make the system inefficient, uneconomical, and bulky. In this paper, a unified resonant tuning configuration with minimum passive component counts is proposed to achieve CC and CV outputs at two ZPA operating frequencies. According to the proposed configuration, all the possible inductive power transfer (IPT) and capacitive power transfer (CPT) topologies are analogized. With these topologies, both CC and CV outputs with ZPA are achieved using a minimum number of compensation components and no additional power switches. Among all the simplest IPT topologies, a primary Series-secondary Series and Parallel (S-SP) compensation topology is illustrated to demonstrate the analysis.