Assessing The Biofidelity Of In Vitro Biomechanical Testing Of The Human Cervical Spine

In vitro biomechanical studies of the osteoligamentous spine are widely used to characterize normal biomechanics, identify injury mechanisms, and assess the effects of degeneration and surgical instrumentation on spine mechanics. The objective of this study was to determine how well four standards in vitro loading paradigms replicate in vivo kinematics with regards to the instantaneous center of rotation and arthrokinematics in relation to disc deformation. In vivo data were previously collected from 20 asymptomatic participants (45.5 +/- 5.8 years) who performed full range of motion neck flexion-extension (FE) within a biplane x-ray system. Intervertebral kinematics were determined with sub-millimeter precision using a validated model-based tracking process. Ten cadaveric spines (51.8 +/- 7.3 years) were tested in FE within a robotic testing system. Each specimen was tested under four loading conditions: pure moment, axial loading, follower loading, and combined loading. The in vivo and in vitro bone motion data were directly compared. The average in vitro instant center of rotation was significantly more anterior in all four loading paradigms for all levels. In general, the anterior and posterior disc heights were larger in the in vitro models than in vivo. However, after adjusting for gender, the observed differences in disc height were not statistically significant. This data suggests that in vitro biomechanical testing alone may fail to replicate in vivo conditions, with significant implications for novel motion preservation devices such as cervical disc arthroplasty implants.