Robust Beamforming Design For Swipt-Based Multi-Radio Wireless Mesh Network With Cooperative Jamming

Wireless mesh networks (WMNs) can provide flexible wireless connections in a smart city, internet of things (IoT), and device-to-device (D2D) communications. The performance of WMNs can be greatly enhanced by adopting a multi-radio technique, which enables a node to communicate with more nodes simultaneously. However, multi-radio WMNs face two main challenges, namely, energy consumption and physical layer secrecy. In this paper, both simultaneous wireless information and power transfer (SWIPT) and cooperative jamming technologies were adopted to overcome these two problems. We designed the SWIPT and cooperative jamming scheme, minimizing the total transmission power by properly selecting beamforming vectors of the WMN nodes and jammer to satisfy the individual signal-to-interference-plus-noise ratio (SINR) and energy harvesting (EH) constrains. Especially, we considered the channel estimate error caused by the imperfect channel state information. The SINR of eavesdropper (Eve) was suppressed to protect the secrecy of WMN nodes. Due to the fractional form, the problem was proved to be non-convex. We developed a tractable algorithm by transforming it into a convex one, utilizing semi-definite programming (SDP) relaxation and S-procedure methods. The simulation results validated the effectiveness of the proposed algorithm compared with the non-robust design.