Closure Of Persisting Full Thickness Macular Holes By Subretinal Fluid Application: Technical Approach And Surgical Considerations

Introduction Firm adhesions between the retina and adjacent retinal pigment epithelium (RPE) may prevent the closure of macular holes (MH) after chromovitrectomy. Controlled application of subretinal (SR) fluid with BSS may release these adhesions leading to closure of the retracted retina in large and or refractory macular holes.Methods For a standardized procedure, it is recommended to exclude residues of epiretinal membranes on the retinal surface preoperatively at OCT or intraoperatively by means of vital dyes. Intraoperatively, a perfluorocarbon (PFO) bubble is placed above the MH and lowers the infusion bottle of 20mmHg. Subsequently, SR-fluid blebs are applied in the upper, temporal and inferior quadrants with a subretinal 41-gauge cannula. After removing decalin bubble, the SR-detachment is enlarged toward the foveal center. This is essential to achieve a complete detachment of the outer macular edges from the RPE. The MH can be closed by a temporary gas endotamponade.Results With a standardized procedure, the operation can be carried out safely and with minimal effort. Additional measures, such as care for bubble-free SR-fluid sands or machine assistance, were added. In a pilot study, experienced VR surgeons performed the SR-fluid application safely and without complications. The preoperative diameter of the MH was 1150 mu m (651-2350 mu m). The secondary closure rate for our PMH was 80.9%.Conclusion SR-adhesions seem to have a previously unnoticed component in persistent macular holes. An SR-fluid application can be carried out quickly, safely and with minimal material effort. The initial results show a high secondary closure rate.