Ablation of piezoelectric polyvinylidene fluoride with a 193 nm excimer laser.

The unique flexible and piezoelectric properties of polyvinylidene fluoride (PVDF) films would allow for new applications for integrated bioelectronic devices. The use of these films has been precluded by the difficulty in machining them into small, discrete features without damaging the properties of the material. The etching of piezoelectric PVDF by means of a 193nm excimer laser is explored and characterized. Etch rates are shown for common laser fluence values, along with images of the quality of the cuts to provide the reader with an understanding of the compromise between etch rate and edge roughness. The authors describe a novel method for the etching of piezoelectric, beta -phase PVDF. While PVDF is flexible, acoustically matched to biological tissue, and has a wide resonance bandwidth, it is often overlooked as a piezoelectric material for micro-electrical-mechanical-system devices because of the difficulty in fabrication. In this paper, the authors characterize the etch rate and quality while using a 193nm argon fluoride excimer laser for patterning.