A novel post-combustion capture process for CO2 from the flue gas of coal-fired power plants using a green, deep eutectic solvent

Green, efficient and low energy consumption capture of CO2 from the flue gas of coal-fired power plants has been one of the most popular research topics in the world. In this work, a concept process of post-combustion capture using a choline chloride/urea (1:2) deep eutectic solvent (DES) as a physical solvent was proposed. The DES-based post-combustion capture (PCC) process is modeled and simulated using the commercial Aspen Plus simulation software. The required parameters were studied and further embedded in Aspen Plus. The simulation results show that the process has a good capture effect; the capture ratio of CO2 is 97.33%, and the purity of CO2 in the product gas is 99.42%. Through sensitivity analysis, the influence of several key parameters on the process performance is studied and reasonable operating conditions are determined. Exergy analysis is carried out for a CO2 absorption unit and a solvent regeneration unit. The results show that the total exergy efficiency of these two units is 74.28%. T...