Bioactive surface modified Ti with titania nanotube arrays to design endoprosthesis for maxillofacial surgery: Structural formation, morphology, physical properties and osseointegration.

Modification of the surface of titanium into titania (TiO2) nanotube (TNT) arrays was performed by electrochemical anodization to design an endoprosthesis for maxillofacial surgery. TNT arrays with different surface structures were successfully coated on titanium substrates by varying the anodizing voltages and annealed at 450 degrees C for 4 h. The phase composition and morphology of the nanotubes were examined by x-ray powder diffraction and field-emission scanning electron microscopy, respectively. The biological functions and water wettability of various surface structures were also investigated. The results demonstrated that the annealed nanotubes were composed of an anatase phase only at all applied voltages. The tube diameters and lengths increased as the voltage increased. The surfaces with modification had more wettability, cell adhesion, proliferation, alkaline phosphatase activity and calcium deposition than the surfaces without modification. Finally, the results demonstrated that a modified surface of titanium to produce TNT arrays as a biomaterial is promising to design an osseointegrated surface of endoprosthesis for maxillofacial surgery.