Enhancement Of Flame Retardancy Of Colorless And Transparent Semi-Alicyclic Polyimide Film From Hydrogenated-Bpda And 4,4 '-Oxydianiline Via The Incorporation Of Phosphazene Oligomer

Enhancement of flame retardancy of a colorless and transparent semi-alicyclic polyimide (PI) film was carried out by the incorporation of phosphazene (PPZ) flame retardant (FR). For this purpose, PI-1 matrix was first synthesized from hydrogenated 3,3 ',4,4 '-biphenyltetracarboxylic dianhydride (HBPDA) and 4,4 '-oxydianiline (ODA). The soluble PI-1 resin was dissolved in N,N-dimethylacetamide (DMAc) to afford the PI-1 solution, which was then physically blended with PPZ FR with the loading amounts in the range of 0-25 wt.%. The PPZ FR exhibited good miscibility with the PI-1 matrix when its proportion was lower than 10 wt.% in the composite films. PI-3 composite film with the PPZ loading of 10 wt.% showed an optical transmittance of 75% at the wavelength of 450 nm with a thickness of 50 mu m. More importantly, PI-3 exhibited a flame retardancy class of UL 94 VTM-0 and reduced total heat release (THR), heat release rate (HRR), smoke production rate (SPR), and rate of smoke release (RSR) values during combustion compared with the original PI-1 film. In addition, PI-3 film had a limiting oxygen index (LOI) of 30.9%, which is much higher than that of PI-1 matrix (LOI: 20.1%). Finally, incorporation of PPZ FR decreased the thermal stability of the PI films. The 10% weight loss temperature (T-10%) and the glass transition temperature (T-g) of the PI-3 film were 411.6 degrees C and 227.4 degrees C, respectively, which were lower than those of the PI-1 matrix (T-10%: 487.3 degrees C; T-g: 260.6 degrees C)