Application Of 2d Temperature Measurement To A Coal-Fired Furnace Using Ct-Tdlas

The measurement of temperature and species concentration in combustion fields is very significant for the development of highly efficient combustion technologies for energy conservation and emission reduction. There are various measurement technologies, including contact and non-contact measurement. Tunable diode laser absorption spectroscopy (TDLAS) technology is a proven non-contact method for detection of the temperature and species concentration by absorption measurement. To enable two-dimensional (2D) representation of temperature and species concentration in combustion fields, the TDLAS technology is usually combined with computed tomography (CT). The latter is, however, considerably new in combustion research, especially in the solid fuel reaction environment. In this paper, a 32-path 2D CT-TDLAS system for temperature measurement in a pilot-scale coal-fired furnace was developed. The accuracy of the CT algorithm in the reconstruction of 2D temperature distributions in different laser-path arrangements was first analyzed using the sum of squared difference (SSD) and zero-mean normalized cross-correlation (ZNCC) by comparing it to the 2D temperature distribution of a full-scale coal-fired furnace simulated using computational fluid dynamics (CFD). The accuracy was improved by 32-path reconstruction. The study was then progressed to investigate its measurement accuracy in a simple CH4-air burner configuration with rounded and rectangular cells as well as sensitivity for flame shift detection, whereby the reconstructed temperature distribution was compared to the temperature measured using a thermocouple. It is verified that this CT reconstruction was feasible for various measurement areas, even if the center of the flame was shifted. Finally, a 32-path 2D CT-TDLAS system with a rectangular-structured cell was developed and applied for temperature measurement in a Tenaga Nasional Berhad (TNB) Research's pilot-scale coal-fired furnace. The 2D temperature distribution in the coal-fired furnace was reconstructed according to the experimental results. The potential of the CT-TDLAS for online 2D temperature measurement for actual applications is demonstrated.