Influence of Moisture Infiltration on Flexible Pavement Cracking and Optimum Timing for Surface Seals

Moisture increase in pavement subsurface layers has a significant influence on granular material properties that affect the expected pavement performance. In situ moisture variations over time in an unbound base layer depend on water infiltration after precipitation and pavement surface conditions. Consequently, base resilient modulus (MR) is reduced, which leads to premature failure and reduced service life. This paper presents long-term pavement performance (LTPP) data analyses for quantifying the effect of moisture infiltration through surface cracking on flexible pavement performance. Subsurface moisture data obtained through the seasonal monitoring program (SMP) time domain reflectometry (TDR) are an excellent source for quantifying the moisture-related damage in flexible pavement located in different climates. An artificial neural network (ANN) model was developed based on the SMP data for flexible pavement sections. The results show that higher levels of cracking will lead to an increase in moisture levels within the base layer, which leads to a significant decrease in the base MR. For flexible pavement, the maximum reduction in base MR ranged from 18% to 41% and from 153% to 175% for the pavement sections located in dry and wet regions, respectively. Consequently, the performance of pavement sections located in wet climates is adversely affected. The findings imply that an adequate and timely preservation treatment for cracking sealing (e.g., surface seals) can enhance the pavement's service life, especially in wet climates. The results suggest that cracks should be sealed when the extent of fatigue cracking is within 6% and 11% for the flexible pavement sections located in wet and dry climates, respectively.