Effect of Nickel Content on Microstructural Evolution in Austempered Solution-Strengthened Ferritic Ductile Cast Iron

The effects of Ni content and austempering temperature on microstructural evolution during austempering in solution-strengthened ferritic ductile cast iron with Ni contents between 0 and 1.1 mass% were investigated. The microstructure observation for the samples austempered at temperatures between 375 and 325 °C using an infrared gold image furnace was carried out with optical microscopy, x-ray diffraction measurements, and electron back-scattered diffraction pattern (EBSP) analysis. In addition, the Vickers hardness of both the austempered and as-quenched samples was measured under a load of 0.9807 N. According to the microstructure observations, the matrix of the samples austempered at temperatures between 375 and 325 °C exhibited finer acicular ferrite microstructure with increasing Ni content. Optical microscopy and EBSP analysis revealed that the amount of high-carbon austenite phase for the austempered samples increased with increasing Ni content and austempering temperature. Although samples with higher Ni content were found to contain more high-carbon austenite phase in the matrix, the Vickers hardness of the samples tended to increase with increasing Ni content at the same austempering temperature. The reason for this may be the higher carbon content in the matrix of the samples with higher Ni contents.