Development Of A High-Temperature Two-Stage Entrained Flow Gasifier Model For The Process Of Biomass Gasification And Syngas Formation

This paper presents development of the Mitsubishi Heavy Industries (MHI) gasifier utilizing an analogy between a model with coal feedstock and the model with torrefied woody biomass. A computational fluid dynamics (CFD) model was primarily developed for coal gasification, and the simulation results were validated with similar published work and experimental measurements. The model was extended for the woody biomass to predict the gasifier performance under the gasification process. The results were used to compare the effect of fuel type on the gasifier performance and gaseous product compositions. The second-level injection nozzles were modified tangentially, and the flow characteristics, species yields, and temperature were evaluated. The possibility of reducing the gasifier length from 13 to 8 m is also evaluated for different total length. The results revealed that using woody biomass leads to a decrease in the mole fraction of CO and H-2 at the gasifier outlet compared with coal. An opposite trend was observed for CO2 and CH4 compositions. The contributions of modified second-level nozzles to the total gas composition and exit temperature only account for less than 3%. Reducing the gasifier length from 13 to 8 m increased the exit temperature from 1289 to 1340 K, but the changes in the exit gas composition were less than 2%. The new design of the MHI gasifier can reduce the investment costs by reducing the gasifier length as well as using biomass instead of coal.