Linseed oil‐based reactive diluents preparation to improve tetra‐functional epoxy resin properties

Two kinds of bio-resourced reactive diluents have been synthesized from linseed oil. The prepared epoxidized linseed oil (ELO) and the cyclocarbonated linseed oil (CLO) were separately blended with a petroleum-based tetra-functional epoxy resin (TGDDM) to improve its processability and to overcome the brittleness of the thermoset network therefrom. The linseed oil modifications were spectrally established, and processability improvement of the resin blends was rheologically confirmed. The curing of samples was studied by differential scanning calorimetry, and their mechanical properties (ie, tensile, flexural, fracture toughness, and adhesion) were investigated as well. Scanning electron microscopy images were obtained to reconfirm the toughness improvement of the modified thermosets. In contrast of the epoxidized soybean oil (ie, the most conventionally studied bio-based reactive diluent), ELO and CLO had no negative effects on the thermoset material characteristics. They improved properties such as tensile strength (up to 43.2 MPa), fracture toughness (1.1 MPa m(1/2)), and peel-adhesion strength (4.5 N/25 mm). It was concluded that ELO and CLO were efficient reactive diluents to be used in formulations of polymer composites, surface coatings, and structural adhesives based on epoxy resins.