Clinical Investigation of the Association of Opening Size with Sagittal Canal Diameter Based on Single-Door Cervical Laminoplasty.

Background: Many clinical studies have assessed the association of laminoplasty opening size (LOS) with sagittal canal diameter (SCD) based on single-door cervical laminoplasty (SDCL). Nevertheless, the "worn-off" lamina extracted in SDCL was neglected in these reports. We aimed to develop a simple mathematical model to analyze the relationship between the effective LOS and SCD, taking into consideration the worn-off lamina. Material/Methods: A total of 106 patients treated by SDCL at our hospital were included in this study. Pre-operative and post-operative SCDs were assessed using a picture archiving and communication system (PACS) based on computed tomography scans. Mini-plate sizes as well as drill bit diameters were recorded in detail in order to determine the effective LOS for each vertebral lamina involved. Results: SCD in all patients was increased significantly after SDCL (P<0.01). A linear correlation was found between effective LOS and the post-operative SCD increment from C3 to C7 (R-2>0.933, P<0.001). The 12 mm mini-plate was most often used in SDCL, accounting for 64.45% of all cases, whereas 10 mm and 16 mm mini-plates were the least used, accounting for 3.85% and 3.00%, respectively. Conclusions: There is a strong linear correlation between effective LOS and the post-operative SCD increment. The SCD was increased by about 0.5 mm per mm increase in effective LOS. Thus, post-operative SCD could be precisely calculated and predicted, enabling the selection of optimal mini-plate prior to SDCL.