A Fully Integrated HF RFID Tag Chip With LFSR-based Light-weight Tripling Mutual Authentication Protocol.

Radio frequency identification (RFID) is widely used in various areas such as logistics, supply-chain management, and access control. The new challenge for designing an RFID tag is how to embed a low-cost and low-power consumption algorithm into a compact RFID tag chip. This paper presents a passive HF-band tag chip supporting ISO/IEC 14443 type A/B protocol with low-cost and low-power consumption. In the Analog Front End, a bridge rectifier with 73.76% power conversion efficiency is presented to accomplish RF-dc conversion. A robust demodulator with both 10% and 100% ASK demodulation capabilities and a subcarrier-based modulator are designed to complete the data transfer process. Moreover, a burr-liminating power ON/OFF reset circuit is proposed to provide a reset signal for the system. In the digital baseband controller, a linear feedback shift register-based light-weight authentication protocol is presented to ensure data security while reducing resource overhead. The embedded 8-Kb EEPROM contains eight independent keys for eight different applicationfields. The tag chip is fabricated in HJ025 2P4M CMOS process with an area of 1.1mm x 1.18mm and total static power consumption of 116.45 mu W. The low cost and low-power consumption ensure the tag chip, especially suitable for smart cards.