Seeded Lateral Solid-Phase Crystallization of the Perovskite Oxide SrTiO3

Crystallization from an amorphous precursor presents a new route to control the properties of complex oxides by selecting their nanoscale morphology. A key challenge in crystal growth from the amorphous form is to select the locations of nucleation and the crystallographic orientation of the resulting crystals. Nucleation sites for crystallization of the prototypical perovskite complex oxide SrTiO3 (STO) from its amorphous form can be reproducibly introduced using nanoscale seed crystals. The results of two seeding strategies are reported here: (i) SrRuO3 (SRO) (001)-oriented nanomembranes and (ii) STO nanocrystalline seeds. Amorphous STO crystallizes laterally over distances of several microns from the seeds before encountering separately nucleated crystals. The lateral crystallization rates for both types of seeding methods are close to the values measured in solidphase epitaxy (SPE) of STO on single-crystal substrates. The lateral crystallization distances along different crystallographic orientations are equal, indicating that the lateral crystallization rate is isotropic. The isotropic crystallization suggests that the rate-limiting steps for crystallization occur within the amorphous STO away from the amorphous/crystalline interface. In addition to the lateral crystallization, STO crystallizes on top of the planar SRO nanomembrane seeds via SPE, forming partially relaxed [001]-oriented heteroepitaxial STO layers. The in-plane orientation of laterally crystallized STO near the SRO nanomembrane seeds exhibits overall polycrystallinity with regions in which micron-scale grains of laterally crystallized STO share the same in-plane orientation as the SRO nanomembrane seeds. Crystallization from seed crystals provides opportunities to create a wide range of other perovskite oxides in nanoscale geometries.