Design and Analysis of a Novel Multiband Microstrip Patch Antenna for Wireless Communication

2018 International Symposium on Advanced Electrical and Communication Technologies (ISAECT)(2018)

引用 6|浏览1
暂无评分
摘要
This paper presents the design of a multiband microstrip patch antenna operating at seven frequencies i.e. 2.4 (Lower Worldwide Interoperability for Microwave Access (WiMAX), 5.3 (Wireless local area network (WLAN)) and 9.1-10.2 GHz (X-band) frequency bands. The radiating element of the antenna is backed by a 1.6 mm thicker FR4-epoxy substrate having a dielectric constant of 4.4 and loss tangent δ = 0.02. The antenna is fed through a 50 Ω microstrip line. The shape of the radiating element is derived from the basic rectangular shape by inserting a circular hole inside a rectangular patch antenna. During simulation, the antenna exhibit hexa band with band width S11<;-10 dB of about 4.76% (4.1-4.3 GHz), 4.71% (5.21- 5.43 GHz), 16.27% (6.55-7.25 GHz), 1.83% (7.02-7.15 GHz), 0.87% (9.07-9.15 GHz) and 4.90% (10.02-10.5 GHz) under simulation. The antenna gives an acceptable simulated efficiency in the seven frequency bands. Suitable gains of 0.25, 0.43, 2.73, 1.98, 1.77 and 1.93 dB are obtained at 4.2, 5.3, 6.8, 7.1, 9.1 and 10.2 GHz, respectively. The antenna matched with a VSR <; 1.2 in the seven frequency bands. The antenna exhibits good impedance matching, radiation characteristics and gain across their operational bandwidths.
更多
查看译文
关键词
multiband patch antenna,microstrip line,FR4-epoxy substrate,WiMAX,WLAN
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要