Characterization Of Light Effect On Photovoltaic Property Of Poly-Si Solar Cell By Using Photoconductive Atomic Force Microscopy

We investigate the effect of light intensity and wavelength of a solar cell device using photoconductive atomic force microscopy(PC-AFM). A POCl3 diffusion doping process is used to produce a p-n junction solar cell device based on a polySi wafer, and the electrical properties of prepared solar cells are measured using a solar cell simulator system. The measured open circuit voltage(V-oc) is 0.59 V and the short circuit current(I-sc) is 48.5 m Lambda. Moreover, the values of the fill factors and efficiencies of the devices are 0.7 and approximately 13.6%, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, is used for direct measurements of photoelectric characteristics in limited areas instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics are observed. Results obtained through PC-AFM are compared with the electric/optical characteristics data obtained through a solar simulator. The voltage(VPC-AFM) at which the current is 0 A in the I-V characteristic curves increases sharply up to 18 W/m(2), peaking and slowly falling as light intensity increases. Here, VPC-AFM at 18 W/m(2) is 0.29 V, which corresponds to 59 % of the average V-oc value, as measured with the solar simulator. Furthermore, while the light wavelength increases from 300 nm to 1,100 nm, the external quantum efficiency(EQE) and results from PC-AFM show similar trends at the macro scale but reveal different results in several sections, indicating the need for detailed analysis and improvement in the future.