Sol-Gel Derived Cu(In,Ga)Se-2 Thin Film Solar Cell

Well crystallized copper indium gallium (di) selenide-Cu(In, Ga) Se-2 (CIGS) thin films were deposited on conducting substrates (molybdenum coated soda-lime glass) by sol-gel dip coating technique. The n-type cadmium sulfide (CdS) buffer layer was produced by chemical bath deposition (CBD) technique and the n-type ZnO: Al thin film has been used as transparent conductive layer was deposited by sol-gel dip coating technique. The selenium powder was dissolved in trioctylphosphine (TOP, 90%, technical grade) solution during the experiment process to make some progress on scientific innovation of CIGS thin films derived by sol-gel dip coating technique. Hence, the heterojunction at Mo/CIGS/CdS/ZnO: Al/Al configuration was produced on a soda-lime silicate glass substrate (SLSG). SLSG/Mo/CIGS/CdS/ZnO: Al/Al heterojunction was fabricated by using a practical economical and more eco-friendly technique. The structural, optical and current-voltage (I-V) characteristics of the CIGS based heterojunction was analysed by using the SLSG/Mo/CIGS/CdS/ZnO: Al/Al device configuration. The optoelectronic properties such as the open-circuit voltage (V-oc), the short-circuit current (I-sc), the fill factor (FF), the ideality factor (n) etc. of the CIGS thin film solar cells were examined depending on the annealing temperature at 500 degrees C for 45 minutes in air. The CIGS thin film heterojunctions which has been obtained present diode like rectifying behaviour besides photovoltaic behaviour under UV illumination.