Evaluation of AlGaN/GaN high electron mobility transistors grown on ZrTi buffer layers with sapphire substrates

AlGaN/GaN high electron mobility transistors ( HEMTs) have been grown on sapphire substrates, using ZrTi buffer layers to provide in-plane lattice-matching to hexagonal GaN. X-ray diffraction ( XRD) as well as cross-section transmission electron microscopy ( TEM) were used to assess the quality of the HEMT structure. The XRD 2h scans showed full-width-at-half-maximum values of 0.16 degrees, 0.07 degrees, and 0.08 degrees for ZrTi alloy, GaN buffer layer, and the entire HEMT structure, respectively. TEM studies of the GaN buffer layer and the AlN/ZrTi/AlN stack showed the importance of growing thin AlN buffer layers on the ZrTi layer prior to growth of the GaN buffer layer. The density of threading dislocations in the GaN channel layer of the HEMT structure was estimated to be in the 10(8) cm(-2) range. The HEMT device exhibited a saturation drain current density of 820mA/mm, and the channel of the fabricated HEMTs could be well modulated. A cutoff frequency ( f(T)) of 8.9GHz and a maximum frequency of oscillation ( f(max)) of 17.3GHz were achieved for HEMTs with gate dimensions of 1 x 200 mu m. (C) 2016 American Vacuum Society.