REVISION TOTAL HIP ARTHROPLASTY USING A MODULAR FLUTED AND TAPERED DISTAL FIXATION STEM: A MINIMUM 10-YEAR FOLLOW-UP STUDY

Introduction As the proximal femoral bone is generally compromised in failed total hip arthroplasty, achievement of solid fixation with a new component can be technically demanding. Clinical studies have demonstrated good medium-term results after revision total hip arthroplasty using modular fluted and tapered distal fixation stems, but, to our knowledge, long-term outcomes have been rarely reported in the literature. The purpose of this study was to report the minimum ten-year results of revision total hip arthroplasty using a modular fluted and tapered distal fixation stem. Materials u0026 Methods We analyzed 40 revision THAs performed in using a modular fluted and tapered distal fixation stem (Fig. 1) between December 1998 and February 2004. There were 11 men (12 hips) and 28 women (28 hips) with a mean age of 59 years (range, 38 to 79 years) at the time of revision THA. According to the Paprosky classification of femoral defects, 5 were Type II, 24 were Type IIIA, and 11 were Type IIIB. An extended trochanteric osteotomy was carried out in 21 (52%) of the 40 hips. Patients were followed for a mean of 11.7 years (range, 10 to 15 years). Results The mean Harris hip score improved from 41 points preoperatively to 85 points at the time of the latest follow-up. A total of 4 hips required additional surgery. One hip had two-stage reconstruction due to deep infection, one had liner and head exchange for ceramic head fracture, one had isolated cup re-revision for aseptic loosening, and one had constrained component revision for recurrent dislocation. No repeat revision was performed due to aseptic loosening of femoral stem. There was no stem fracture at the modular junction. Kaplan-Meier survivorship with an end point of stem re-revision for any reason was 98.1% at 11.7 years (Fig. 2), and, for aseptic stem loosening, the best-case scenario was 100% and the worst-case scenario was 91.9% at 11.7 years (Fig. 3). Conclusions A modular fluted and tapered distal fixation stem continued to provide a reliable fixation at a minimum ten years after revision THA and can therefore be recommended as a promising option for challenging revision situations with femoral bone defects.