3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique.
ACS applied materials & interfaces(2016)
摘要
In this work, three-dimensional (3D) structured hybrid materials were fabricated combining 3D printing technology with in situ generation of inorganic nanoparticles by sol-gel technique. Those materials, consisting of silica nanodomains covalently interconnected with organic polymers, were 3D printed in complex multilayered architectures, incorporating liquid silica precursors into a photocurable oligomer in the presence of suitable photoinitiators and exposing them to a digital light system. A post sol-gel treatment in acidic vapors allowed the in situ generation of the inorganic phase in a dedicated step. This method allows to build hybrid structures operating with a full liquid formulation without meeting the drawbacks of incorporating inorganic powders into 3D printable formulations. The influence of the generated silica nanoparticle on the printed objects was deeply investigated at macro- and nanoscale; the resulting light hybrid structures show improved mechanical properties and, thus, have a huge potential for applications in a variety of advanced technologies.
更多查看译文
关键词
3D printing,digital light processing (DLP),hybrid nanocomposite,mechanical properties,sol−gel
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络