First Demonstration Of A 400 Gb/S 4 Lambda Cwdm Tosa For Datacenter Optical Interconnects

We present the first demonstration of a 4 lambda transmitter optical sub-assembly (TOSA) on the coarse wavelength division multiplexing (CWDM) grid, i.e., 20 nm spacing, targeting 400G-FR4 requirements over 2 km. The TOSA is based on uncooled InP external modulated laser (EML) technology and it utilizes four EMLs followed by a CWDM multiplexer. We characterize the performance of the TOSA versus received optical modulation amplitude (OMA), number of equalizer taps, reach, modulation format, TOSA case temperature, and bit rate. Four 53 Gbaud 4-level pulse amplitude modulation (PAM4) RF signals are used to drive the TOSA achieving a net rate of 400 Gb/s. Results reveal that 400 Gb/s can be transmitted over 2 km of single mode fiber (SMF) at a bit error rate (BER) below the KP4-forward error correction (KP4-FEC) threshold (i.e., 2.4 x 10(-4)) using only a 5 tap feed forward equalizer at the receiver. To the best of our knowledge, this is the first demonstration of 400 Gb/s using a 4 lambda CWDM TOSA over 2 km of SMF. Moreover, we achieve 400 Gb/s and 600 Gb/s over 20 km and 10 km below KP4-FEC and the 7% hard-decision FEC (HD-FEC) (i.e., 3.8 x 10(-3)) thresholds, respectively, without optical amplification. Furthermore, we show the performance of the TOSA against temperature, where it shows no significant change in the BER performance from 20 degrees C to 60 degrees C. Finally, we compare the performance of PAM2, PAM4, and PAM8 modulation formats where we show the possibility of achieving 400 Gb/s aggregate bit rate using 42 Gbaud PAM8 modulation format at the expense of utilizing a stronger FEC. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement