A Flexible Sensing Unit Manufacturing Method of Electrochemical Seismic Sensor.

This paper presents an electrochemical seismic sensor in which paraylene was used as a substrate and insulating layer of micro-fabricated electrodes, enabling the detection of seismic signals with enhanced sensitivities in comparison to silicon-based counterparts. Based on microfabrication, paralene-based electrochemical seismic sensors were fabricated in which the thickness of the insulating spacer was 6.7 mu m. Compared to silicon-based counterparts with similar to 100 mu m insulating layers, the parylene-based devices produced higher sensitivities of 490.3 +/- 6.1 V/(m/s) vs. 192.2 +/- 1.9 V/(m/s) at 0.1 Hz, 4764.4 +/- 18 V/(m/s) vs. 318.9 +/- 6.5 V/(m/s) at 1 Hz, and 4128.1 +/- 38.3 V/(m/s) vs. 254.5 +/- 4.2 V/(m/s) at 10 Hz. In addition, the outputs of the parylene vs. silicon devices in response to two transit inputs were compared, producing peak responses of 2.97 V vs. 0.22 V and 2.41 V vs. 0.19 V, respectively. Furthermore, the self-noises of parylene vs. silicon-based devices were compared as follows: -82.3 +/- 3.9 dB vs. -90.4 +/- 9.4 dB at 0.1 Hz, -75.7 +/- 7.3 dB vs. -98.2 +/- 9.9 dB at 1 Hz, and -62.4 +/- 7.7 dB vs. -91.1 +/- 8.1 dB at 10 Hz. The developed parylene-based electrochemical seismic sensors may function as an enabling technique for further detection of seismic motions in various applications.