Effect of grain size and segregation on the cryogenic toughness mechanism in heat-affected zone of high manganese steel

High manganese steels have been nominated as desirable materials used for various cryogenic applications due to their excellent cryogenic toughness caused by twinning. High manganese steel welded joints were obtained through gas metal arc welding, and the microstructural differences at three subzones of heat-affected zone (HAZ) were utilized. The aim was to investigate the effect of grain size and Mn/C/Cu segregation on the cryogenic toughness mechanism of high manganese steel welded joints. The results indicate that the average impact absorbed energies at −196 °C for 1.0, 3.0, and 5.0 mm from the fusion line (denoted by FL + 1, FL + 3, and FL + 5) is 118.6 J, 102.4 J, and 117.2 J, respectively. Compared with base metal, the embrittlement occurred in HAZ. Large grains improve toughness, while small grain boundaries, segregation, and precipitation in HAZ deteriorate toughness. Larger grain size facilitates the primary twins with thinner inter-twin spacing and twin thickness, and the high density of these primary twins inhibits the activation of secondary twins. This, in turn, enhances cryogenic impact toughness. Although the stacking fault energy (SFE) throughout the welding joint lays within the range for the twinning-induced plasticity effect, the enrichment of Mn/C/Cu slightly increases the local SFE and critical resolved shear stress for twining within the segregation zone. This phenomenon makes the activation of primary twins more challenging. Furthermore, the C segregation at grain boundaries leads to the precipitation of fine Cr23C6 carbides. These carbides serve as crack initiation points during impact tests, contributing to degradation in cryogenic impact toughness.