Trading Accuracy for Energy in Stochastic Circuit Design.

As we approach the limits of traditional Moore’s-Law scaling, alternative computing techniques that consume energy more efficiently become attractive. Stochastic computing (SC), as a re-emerging computing technique, is a low-cost and error-tolerant alternative to conventional binary circuits in several important applications such as image processing and communications. SC allows a natural accuracy-energy tradeoff that has been exploited in the past. This article presents an accuracy-energy tradeoff technique for SC circuits that reduces their energy consumption with virtually no accuracy loss. To this end, we employ voltage or frequency scaling, which normally reduce energy consumption at the cost of timing errors. Then we show that due to their inherent error tolerance, SC circuits operate satisfactorily without significant accuracy loss even with aggressive scaling. This significantly improves their energy efficiency. In contrast, conventional binary circuits quickly fail as the supply voltage decreases. To find the most energy-efficient operating point of an SC circuit, we propose an error estimation method that allows us to quickly explore the circuit’s design space. The error estimation method is based on Markov chain and least-squares regression. Furthermore, we investigate opportunities to optimize SC circuits under such aggressive scaling. We find that logical and physical design techniques can be combined to significantly expand the already-powerful accuracy-energy tradeoff possibilities of SC. In particular, we demonstrate that careful adjustment of path delays can lead to significant error reduction under voltage and frequency scaling. We perform buffer insertion and route detouring to achieve more balanced path delays. These techniques differ from conventional path-balancing techniques whose goal is to minimize power consumption by resizing the non-critical paths. The goal of our path-balancing approach is to increase error cancellation chances in voltage-/frequency-scaled SC circuits. Our circuit optimization comprehends the tradeoff between power overheads due to inserted buffers and wires versus the energy reduction from supply voltage downscaling enabled by more balanced path delays. Simulation results show that our optimized SC circuits can tolerate aggressive voltage scaling with no significant signal-to-noise ratio (SNR) degradation. In one example, a 40% supply voltage reduction (1V to 0.6V) on the SC circuit leads to 66% energy saving (20.7pJ to 6.9pJ) and makes it more efficient than its conventional binary counterpart. In the same example, a 100% frequency boosting (400ps to 200ps) of the optimized circuits leads to no significant SNR degradation. We also show that process variation and temperature variation have limited impact on optimized SC circuits. The error change is less than 5% when temperature changes by 100°C or process condition changes from worst case to best case.