Numerical Simulation Of Microstructure Evolution Of Heavy Steel Casting In Casting And Heat Treatment Processes

The microstructure evolution of hypoeutectoid steel during casting and heat treatment processes was simulated by using cellular automaton method. In the simulation, the peritectic solidification, a phase precipitation and pearlite transformation during casting process were considered, and the austenite formation, grain coarsening and decomposition during heat treatment were simulated. The final microstructure, including the average grain size and fraction of a phase as well as the average interlamellar spacing of pearlite, was obtained. The use of through-process simulation as well as a comparison with experiments was demonstrated using a hollow shaft casting as an example. By using the model, the microstructure evolution at different locations in the hollow shaft was simulated, in which the thermal history data obtained by simulating the casting and heat treatment processes were adopted. Metallographic samples taken from the test bar were examined and corresponding mechanical properties tests were conducted. The simulated results were compared with the experimental results to validate the model.