Physical And Mechanical Characteristics Of Kevlar Fiber-Reinforced Pc/Abs Composites

In this research, the laminated composites between the blend of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) and Kevlar fiber were prepared. The flexural and tensile properties of PC/ABS alloy and its composites were determined using a universal testing machine. The synergistic behavior of flexural modulus was observed for all regions of PC contents, while the synergism of flexural strength and tensile strength were found in some PC contents. It was found that the optimum weight ratio of PC: ABS was 60: 40. In the Kevlar Fiber-reinforced PC/ABS composite system at PC: ABS of 60: 40, both flexural modulus and strength were increased with matrix contents. Additionally, the flexural strength drastically increased with the matrix content and then reached the maximum value of 167 MPa at the matrix content of 33.4 wt%. The results from peel test, water contact measurement, and scanning electron microscopy (SEM) reveal that the interfacial adhesion between the Kevlar fiber and the polymer matrix could be improved by increasing the PC content in the matrix.