Investigation Of Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Hole Transport Layer For Solution-Processed Polymer Solar Cells

The inverted polymer solar cell was prepared by self-made spray-coating system, and the poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) hole transport layer was studied. 220nm poly-(3-hexylthiophene):[6,6]-phenylC 61 butyric-acid methyl-ester (P3HT:PCBM) and 40 nm PEDOT: PSS were deposited on ZnO thin film subsequently by solution spray coating. Different volume of isopropyl alcohol was introduced into PEDOT: PSS to decrease the contact angle and obtain the optimum Marangoni flow. The surface morphology and roughness of PEDOT: PSS films were characterized by atomic force microscopy with varied deposition temperature from 70 degrees C to 160 degrees C. The improvement of power conversion efficiency (PCE) was attributed to the enhancement of vertical phase separation in PEDOT:PSS film, which improved the charge transfer in the bulk cell. The highest PCE of spray-coated PSCs reached 2.80% after postannealing for 10 min.