Ce-Nd separation by solid-phase micro-extraction and its application to high-precision Nd-142/Nd-144 measurements using TIMS in geological materials

In view of the low initial abundance of Sm-146, Nd-142 anomalies are expected to be extremely small (less than 40 ppm), and their detection requires ultra-precise Nd-142/Nd-144 measurements. A rapid solid-phase micro-extraction (SPME) technique, using HEHEHP resin as sorbent, is established to completely separate Ce from rare earth element (REE) mixtures. This technique is applied to ultra-high-precision Nd-142/Nd-144 measurements in geological materials. In contrast to the traditional liquid-liquid micro-extraction (LLME) technique, the benefits of the SPME tandem column are high Nd recovery, low residual Ce (Ce/Nd < 10(-6)), and easy operability. In addition, a single HEHEHP resin column, replacing the traditional two-column scheme (AG 50W + HDEHP resins), is used to further purify Nd by removing Na salt and Sm isobaric interferences. All mean values of Ce-140/Nd-144 of geological samples after separation never exceed 0.000010 even though the Ce/Nd ratio of geological materials is >3.0. Thus, Ce-142 interferences on Nd-142 never exceed 1.3 ppm. Ultra-high-precision thermal ionization mass spectrometry analyses of silicate standards show that the internal precision of all runs are better than 4 ppm (2 RSE) for Nd-142/Nd-144 values. Nd-142/Nd-144 values for JNdi-1, JR-3, and BCR-2 have external precisions of +/- 4.8, +/- 4.4, and +/- 3.9 ppm (2 RSD), respectively. The external reproducibility is sufficient to distinguish and resolve 5 ppm anomalies in Nd-142/Nd-144 values.