Electrochemical Model-Based State of Charge and Capacity Estimation for a Composite Electrode Lithium-Ion Battery

Increased demand for hybrid and electric vehicles has motivated research to improve onboard state of charge (SOC) and state of health estimation (SOH). In particular, batteries with composite electrodes have become popular for automotive applications due to their ability to balance energy density, power density, and cost by adjusting the amount of each material within the electrode. SOH algorithms that do not use electrochemical-based models may have more difficulty maintaining an accurate battery model as the cell ages under varying degradation modes, such as lithium consumption at the solid-electrolyte interface or active material dissolution. Furthermore, efforts to validate electrochemical model-based state estimation algorithms with experimental aging data are limited, particularly for composite electrode cells. In this paper, we first present a reduced-order electrochemical model for a composite LiMn 2 O 4 -LiNi 1/3 Mn 1/3 Co 1/3 O 2 electrode battery that predicts the surface and bulk lithium concentration of each material in the composite electrode, as well as the current split between each material. The model is then used in dual-nonlinear observers to estimate the cell SOC and loss of cyclable lithium over time. Three different observer types are compared: 1) the extended Kalman filter; 2) fixed interval Kalman smoother; and 3) particle filter. Finally, an experimental aging campaign is used to compare the estimated capacities for five different cells with the measured capacities over time.