Effect of Fabrication Parameters on the Characteristics of Fresnel Lens and Piezoelectric Transducers
FERROELECTRICS(2012)
摘要
A two-mask fabrication process of a four-level Fresnel lens was used to evaluate its characteristics through investigating the effect of SU-8 photoresist on the profile of the focusing lens. A two-step deposition of ZnO films was applied to develop a feasible fabrication of a piezoelectric transducer with the structure Al/ZnO/Pt/Ti/SiO2/Si under reasonable conditions, which include deposition pressure of 0.7 Pa and 1.3 Pa, RF power of 100 W and 178 W, and sputtering gas ratio Ar:O-2 = 1:3 and 1:1 for first and second step deposition, respectively. Highly c-axis textured ZnO films were successfully obtained through two-step deposition process.
更多查看译文
关键词
Fresnel lens,piezoelectric transducer,ultrasonic focusing ejector,Zinc oxide (ZnO),sputtering
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络