Joining aluminium to titanium by MIG welding-brazing process
MATERIALS AND DESIGN, PTS 1-3(2011)
摘要
With Al-Si welding wire ER4043, lap joint between aluminium and titanium alloy was made by MIG welding-brazing process with nocolok flux aiding filler metal in promoting metal wettability. A thin intermetallic compound layer was formed at the interface between the weld metal and titanium alloy and the layer mainly consits of TiA13 phase. The tensile strength of the joint can reach 151MPa and fracture occurred in aluminium base metal.
更多查看译文
关键词
Welding-brazing,Intermetallic compounds,Nocolok flux,Lap joint
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要