Advanced Retrograde Well Technology for 90-nm-Node Embedded Static Random Access Memory Using High-Energy Parallel Beam

The advantage of forming a retrograde well using a high-energy parallel beam has been experimentally clarified for the first time. A conventional batch-type implanter requires tilted implantation to suppress the spatial variation in a wafer. Tilted implantation, however, imposes a limit on inter-well isolation. since it deteriorates the punchthrough resistance between the source-drain diffusion and the well, and causes variation in the threshold voltage for metal-oxide-semiconductor field-effect transistors (MOSFETs) around the well boundary. A parallel beam produced by a single-wafer implanter is found to give quite a uniform doping profile even for W-normal implantation. Small tilt an-le implantation using a high-energy parallel beam improves inter-well isolation by similar to 0.16 mum compared with the conventional 7degrees-tilted implantation, which yields a similar to 15% reduction in the static random access memory (SRAM) cell size. This advanced retrograde well technology is indispensable for inter-well isolation of a 90-nm-node embedded SRAM with a sub-1-mum(2) cell.