Nanostructured bimetallic alloys prepared via mechanochemical synthesis as PEMFC electrocatalysts for automotive applications

Pt–Co alloys prepared by high energy ball milling synthesis were tested as electrocatalysts for hydrogen fueled Polymer Electrolyte Membrane Fuel Cells (PEMFC). In the present contribution we report on the first results regarding the electrochemical behaviour of two samples of Pt–Co alloys. One sample contains 20 wt.% alloy Pt:Co in the molar ratio 0.25:0.75 and C 80 wt.% and the second one Pt:Co in the molar ratio 0.75:0.25 and C 80 wt.%. The electrochemically active surface (EAS) was determined by cyclic voltammetry data while the electrocatalyst performance in a real cell was obtained by assembling Membrane Electrode Assemblies (MEAs) with the considered sample at the cathode. The results obtained, though indicating a lower performance than all-Pt catalysts, are quite interesting as they point out the importance of the C/Pt, Nafion/Pt and Pt/Co ratios that exert a deep influence onto the cell performance.