A multiple frequency clock generator using wide operation frequency range phase interpolator

Microelectronics Journal(2013)

引用 2|浏览0
暂无评分
摘要
This paper presents a multiple frequency clock generator that is composed of the wide operation frequency range phase interpolator and the phase combiner. The wide operation frequency range phase interpolator is developed using a delay-time-adjustment phase interpolator (DTAPI) circuit with various oscillation frequencies for different clock domain applications. The phase combiner generates multiple clock frequencies through various phase combination inputs generated by the preceding proposed phase interpolators. The varying output transition delay time of the proposed DTAPI is the result of the various oscillation frequencies of the voltage-controlled oscillator. The test chip was fabricated in a 0.18@mm CMOS process with a 1.8V supply voltage. The measured phase noise and power dissipation are -87.28dBc/Hz at 1MHz offset frequency from 88.8MHz and 1.32mW, -77.47dBc/Hz and 2.06mW from 797.8MHz, respectively. The duty cycle error rate of the output clock frequency is less than 1.5%.
更多
查看译文
关键词
various phase combination input,multiple clock frequency,measured phase noise,preceding proposed phase interpolators,phase combiner,various oscillation frequency,delay-time-adjustment phase interpolator,wide operation frequency range,phase interpolator,multiple frequency clock generator,duty cycle,voltage controlled oscillator
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要